How to fix a washing machine that won’t spin (step-by-step guide)

Washing machine without spin? Find out how to fix this common problem with our step-by-step guide and keep your washing machine in perfect condition.

Washing machines are essential appliances in any home, and when they stop working properly, it can cause a lot of inconvenience. One of the most common problems you may encounter is that your washing machine won’t spin. This post will guide you through the possible causes and solutions for this problem. We’ll break down each step in a simple and straightforward way so you can fix the problem yourself.

1. Check the load of the washing machine

One of the most common mistakes is overloading your washing machine. If the load of laundry is too large, it can unbalance the washing machine, preventing it from spinning properly. Here’s what to do:

– Step 1: Turn off and unplug the washing machine.
– Step 2: Open the washing machine door and remove some of the clothes.
– Step 3: Distribute the clothes evenly inside the drum.

After balancing the load, try running the spin cycle again.

2. Check the lid or door of the washing machine

Washing machines have a safety switch that prevents the machine from spinning if the door or lid is not properly closed. If this switch is faulty, the washing machine will not spin.

– Step 1: Make sure the door or lid is completely closed and locked.
– Step 2: If the door appears closed but the washer does not spin, there may be a problem with the door switch. Check your owner’s manual to locate the switch.
– Step 3: Use a multimeter to check the switch for continuity. If there is no continuity, the switch needs to be replaced.

3. Check the spin cycle

Sometimes the problem may be as simple as the spin cycle not being activated correctly.

– Step 1: Make sure you have selected the spin cycle on the control panel.
– Step 2: If your washing machine has options for different spin speeds, try selecting a different speed.
– Step 3: If your washing machine has a separate drain cycle, run it before the spin cycle to ensure the water has drained properly.

4. Examine the drain hose.

A clogged drain hose can prevent the washing machine from draining water, which in turn can stop the spin cycle.

– Step 1: Turn off and unplug the washing machine.
– Step 2: Locate the drain hose at the back of the washing machine.
– Step 3: Disconnect the hose and check for obstructions or kinks.
– Step 4: Clear any obstructions you find and reconnect the hose.

5. Inspect the drain pump

The drain pump is responsible for removing water from the washing machine. If it is blocked or faulty, the washing machine will not be able to spin.

– Step 1: Turn off and unplug the washing machine.
– Step 2: Remove the front or rear panel of the washing machine to access the drain pump.
– Step 3: Inspect the pump and filter for any obstructions.
– Step 4: Clean the pump and filter if necessary. If the pump is defective, it must be replaced.

6. Check the washing machine motor

The motor is a crucial part of the spin cycle. If the motor is faulty, the washing machine will not spin.

– Step 1: Turn off and unplug the washing machine.
– Step 2: Remove the rear panel of the washing machine to access the motor.
– Step 3: Use a multimeter to check the motor for continuity. If there is no continuity, the motor must be replaced.

7. Examine the drive belt

On some washing machines, a faulty drive belt may prevent the drum from spinning during the spin cycle.

– Step 1: Turn off and unplug the washing machine.
– Step 2: Remove the back or bottom panel of the washing machine to access the drive belt.
– Step 3: Inspect the belt for any breakage or wear. If necessary, replace it with a new one.

8. Check the shock absorbers and springs

Shock absorbers and springs help keep the drum balanced during the spin cycle. If they are damaged, the washing machine may not spin properly.

– Step 1: Turn off and unplug the washing machine.
– Step 2: Remove the side panel of the washing machine to access the shock absorbers and springs.
– Step 3: Inspect the shock absorbers and springs. If they are damaged, replace them.

9. Inspect the timer

The timer controls the cycles of the washing machine. If it is faulty, it can prevent the washing machine from advancing to the spin cycle.

– Step 1: Turn off and unplug the washing machine.
– Step 2: Locate the timer on the control panel.
– Step 3: Use a multimeter to check the timer for continuity. If there is no continuity, the timer needs to be replaced.

10. Consult the user manual

If all of the above steps do not resolve the issue, you may need to consult your owner’s manual for instructions specific to your washing machine model. Sometimes, problems may be unique to certain models and the manual may offer additional solutions.

Additional Tips

– Regular maintenance: Perform regular maintenance on your washing machine to prevent future problems. Clean the drum, filter and hoses periodically.
– Correct use: Avoid overloading the washing machine and follow the manufacturer’s recommendations for the correct use of detergent and other cleaning products.
– Professional: If you don’t feel comfortable doing these repairs yourself, you can always seek the help of a professional technician.

By following these steps and tips, you will be able to diagnose and fix a washing machine that won’t spin. Always keep safety as your priority and make sure to unplug the washing machine before making any repairs.

Post views: 4